New indexes for compound prioritization and complexity quantification on environmental monitoring inventories

Introduction  

Lists of compounds resulting from environmental monitoring may be conveniently represented in a very general way using Pareto distributions, after ranking them on descending order according to their concentration or hazard quotient expressed as percentages, depending on whether the objective of the monitoring is focussed on mass load occurrence or risk assessment respectively.     

Screening for Stockholm Convention persistent organic pollutants in the Bosna River (Bosnia and Herzogovina)

The Stockholm Convention, which aspires to manage persistent organic pollutants (POPs) at the international level, was recently ratified in Bosnia and Herzegovina (BiH). Despite this fact, there is in general a paucity of data regarding the levels of POPs in the environment in BiH. In the present study, screening for POPs was conducted in one of the country’s major rivers, the Bosna. A two-pronged approach was applied using passive samplers to detect the freely dissolved and bioavailable concentrations in the water phase and sediment analysis to provide an integrated measure of historical contamination. At several places along the river, the concentrations of polycyclic aromatic hydrocarbons (PAH) were high and exhibited potential for both chronic and acute effects to biota. River water also showed elevated concentrations of PAH, up to 480 ng L^?1 near the city of Doboj, and diagnostic ratios suggested combustion sources for the contamination present in both types of sample. The levels of the other contaminants measured—polychlorinated biphenyls (PCBs), organochlorine pesticides (OCPs) and polybrominated diphenyl ethers—were generally low in the water phase. However, PCBs and some OCPs were present in river sediments at levels which breach the international criteria and thus suggest potential for ecological damage. Additionally, the levels of heptachlor breached these criteria in many of the sites investigated. This study presents the first screening data for some of these Stockholm Convention relevant compounds in BiH and reveals both low concentrations of some chemical groups, but significant point sources and historic contamination for others.     

Remediation aspect of microbial changes of plant rhizosphere in mercury contaminated soil

Phytoremediation, an approach that uses plants to remediate contaminated soil through degradation, stabilization or accumulation, may provide an efficient solution to some mercury contamination problems. This paper presents growth chamber experiments that tested the ability of plant species to stabilize mercury in soil. Several indigenous herbaceous species and Salix viminalis were grown in soil collected from a mercury-contaminated site in southern Poland. The uptake and distribution of mercury by these plants were investigated, and the growth and vitality of the plants through a part of one vegetative cycle were assessed. The highest concentrations of mercury were found at the roots, but translocation to the aerial part also occurred. Most of the plant species tested displayed good growth on mercury contaminated soil and sustained a rich microbial population in the rhizosphere. The microbial populations of root-free soil and rhizosphere soil from all species were also examined. An inverse correlation between the number of sulfur amino acid decomposing bacteria and root mercury content was observed. These results indicate the potential for using some species of plants to treat mercury contaminated soil through stabilization rather than extraction. The present investigation proposes a practical cost-effective temporary solution for phytostabilization of soil with moderate mercury contamination as well as the basis for plant selection.     

A Method of Mercury Removal from Topsoil Using Low-Thermal Application

Mercury contamination in the environment is problematic due to the unusual physical properties and well-recognized toxicity of this common metal. The bioavailability of mercury depends strongly on its chemical speciation. Anthropogenic mercury and its compounds appear in soil as hot spots located close to industrial facilities that used or produced mercury. The nature of the chemical production process, transportation and disposal practices often determined the chemical composition and distribution of mercury in the surrounding soils. Current ex situ soil remediation methods are expensive, produce undesirable side effects to the environment and usually involve transportation of contaminated soil.In this project, sponsored by the U.S. Department of Energy, a low-cost, simple approach to removing mercury from soil was evaluated. The process uses low-temperature thermal desorption of volatile metallic mercury and its compounds, and subsequent vapor capture.The project consisted of laboratory and plot-scale experiments. The laboratory efforts evaluated theoretical calculations of mercury removal as a function of time and temperature. The plot-scale experiment was a practical application of the laboratory results. For both experiments, mercury-polluted soil was obtained from a chemical production facility located in southern Poland. In laboratory experiments, at temperature 373 K total mercury concentration decreased in soil by nearly 32%. In plot-scale experiments, at temperature 440 K, about 60–70% of total mercury was removed from the soil.At the end of the experiment, a test of soil biological activity was performed to check if the high temperature applied to the soil did not impair the soil growth properties. There was no negative effect of temperature found.     

Large particles are responsible for elevated bacterial marker levels in school air upon occupation

Muramic acid (Mur) is found in bacterial peptidoglycan (PG) whereas 3-hydroxy fatty acids (3-OH FAs) are found in Gram-negative bacterial lipopolysaccharide (LPS). Thus Mur and 3-OH FAs serve as markers to assess bacterial levels in indoor air. An initial survey, in a school, demonstrated that the levels of dust, PG and LPS (pmol m(-3)) were each much higher in occupied rooms than in the same rooms when unoccupied. In each instance, the Mur content of dust was increased and the hydroxy fatty acid distribution changed similarly suggesting an alteration in the bacterial population. Here, findings are compared with results from two additional schools. Follow-up aerosol monitoring by particle size was also performed for the first time for all 3 schools. The particle size distribution was shown to be quite different in occupied versus unoccupied schoolrooms. Within individual classrooms, concentrations of airborne particles [greater-than-or-equal]0.8 [micro sign]m in diameter, and CO(2) were correlated. This suggests that the increased levels of larger particles are responsible for elevation of bacterial markers during occupation. Release of culturable and non-culturable bacteria or bacterial aggregates from children (e.g. from flaking skin) might explain this phenomenon.     

The preparation of calcium phosphate adsorbent from natural calcium resource and its application for copper ion removal

Environmental Science and Pollution Research - Using the hen eggshells (biowaste) as a source of calcium and an environmentally friendly approach, the nanopowder composed of 74% of hydroxyapatite...     

Adsorption of arsenic (V) by iron (III)-modified natural zeolitic tuff

Adsorption of arsenic (V) by natural zeolitic tuff, modified with iron (III), was investigated. Also, the iron (III) adsorption characteristics by natural zeolitic tuff was evaluated. It was determined that iron (III) adsorption by starting zeolitic tuff was best represented by the Freundlich type of isotherm, having correlation coefficient (r ²) of 0.990. Arsenic (V) adsorption by iron (III)-modified zeolitic tuff followed a nonlinear type of isotherm. The best fit of the experimental data was obtained using the Langmuir–Freundlich model (r ² = 0.99), with the estimated maximum of arsenic (V) adsorption to iron (III)-modified zeolitic tuff of 1.55 mg/g.     

Multidimensional Approaches to Calculation of Design Floods at Confluences—PROIL Model and Copulas

Environmental Modeling & Assessment - In confluence areas, where river flow slowdowns can be substantial, the selection of design flows for the purpose of designing a flood control system...